How to configure DSL-2750U as an access point

The following is the procedure to configure your Dlink DSL-2750  as an access point :

• log into the gui (default ip : 192.168.1.1 )
• click wireless > manual wireless connection setup
• give your wireless a network name
• select security mode as WPA
• save setting.
• click setup > lan setup/network settings
• disabled dhcp server
• save settings
• change the router ip address in your network range
• save settings
• power off the DSL-2750U
• connect a lan cable in one of the four lan port from your  main router

• power on and wait for 60 seconds 
• check your connectivity